How to make a log splitter with a hydraulic jack

How To Make A Log Splitter With A Hydraulic Jack

How to make a log splitter with a hydraulic jack

A log splitter is generally a proactive tool which is needed for a lot of work. It especially comes in handy during the colder months when you have to split logs. Instead of spending all the hours chopping the woods with an axe, a log splitter makes the work faster and easier for you. Especially if the splitter is convenient for you to use, you don’t have to put in much effort since the work is done in an hour or two. But it can be tough at times to get a log splitter from somewhere at a higher price. So if you have a hydraulic jack at home, it is an easy get-set-go job for you. 

Read Our Reviews On: Best Electric Log Splitter

How To Make A Log Splitter Out At Your Home?

There are a ton of ways through which you can make a log splitter at home. Especially if you have a hydraulic jack then the work is easier. Instead of spending a lot of bucks, trying to find a convenient splitter from the market, you can pick up one which helps you to chop the logs easily. A little effort is needed from your end because a hydraulic jack comes with half of the price. In this article, we will help you to get a step by step guide onto this matter. It will help you to make a log splitter out of a jack which is only present at a dime. 

What Will You Need?

Before we can proceed with the step by step guide, let us have a look into the items that you need. Make sure that you have these items ready by your side. If you are an average handyman then you might have these items right beside your tool-shed. Otherwise, it is advisable that you get from the nearby store at a benefitted price. 

  1. A hydraulic jack. 
  2. Sheet metal. 
  3. Steel beam. 
  4. Hydraulic hose. 
  5. A single blade wedge. 
  6. Steel bracket clamps. 
  7. Acetylene torch. 
  8. Welding mask. 
  9. Protective gloves. 
  10. Castor wheels. 

How To Make A Log Splitter With A Hhydraulic Jack

  1. Make The Frame

    If you want to make alog splitter out of the hydraulic jack, the first thing which you have to do is to make the frame. The frame of your log splitter should be optimum. It is necessary since it can work to push the wood into the wedge. There should be around four legs of the frame which you are building. 
    Make the frame in the shape of a sawhorse. There is a trick which you can use while making. The size of the frame depends on the overall size of the hydraulic jack. It also depends on the wedge which is used for cutting the whole log. Make sure that you put in for a correct measurement during building. Once you are done with making the measurement, build the frame accordingly. Remember to wear the necessary items and protective gears, shield your face while making it. 

  2. Make The Sliding Block

    After making the frame, the second step which you have to take is to build the sliding block. It is generally the portion of the log splitter where the wood is placed. If you want to keep on with the measurement, there is no specific necessity for it. It completely depends on the dimension of the wood which you are using. Welding the sliding block is really easy and it takes little to no time to do it. Use all the additional shims which are present. Testing the motion of the sliding block is really important since you need to satisfy the motion before you set it for usage. 

  3. Mounting The Whole Jack

    This is a really important step and you have to pay corrective attention while doing it. After you are done with making the sliding block, proceed with your mounting jack. It is the most essential part of your log splitter. If you are worried as to how you are going to mount the jack, you don’t have to be worried at all. The work is easy. 

    Simply place the jack on one end of the frame during the time of mounting. Make sure that the measurement which you have taken is correct. Determine the place where you need to mount the jack and then put a collar around the neck of the jack and weld the collar directly into the frame. If you don’t want to end up with a wobbly log splitter then you need to make sure that the collar measurement is taken firmly. Push the wood around at the wedge during welding to complete the whole process. 

  4. Attach The Whole Wedge

    After mounting, you need to attach the wedge to make sure whether it fits or not. At the opposite side of where you have mounted your jack, you need to weld the blade in the right place. When you are welding, make sure that the jack does not push the wood towards the blade. 

    If you can try, use the single blade wedge for attaching so that you can simply weld the pieces together into the sharpened wedge. Before you weld, make sure to take note of the kind of wood you are going to cut. Make sure that the pressure is kept at such an optimum speed so that it can cut through any type of wood which is presented in front of the weld. These hydraulic jacks are generally opted and manually operated. You need to make sure that you use a sharper wedge for splitting the logs. 

  5. Attach The Wheels To The Splitter

    It is time for you to attach the wheels to the splitter which you have just made out of your jack. This is completely an optional step and you can always choose to leave it out if you want. Wheels are generally attached with the log splitter to make sure that they are completely convenient for usage. 

    Bear in mind that the finished product that you make will be heavy. So moving it from one place to the other can be a huge ordeal from your end. This is why wheels are advised to put in. There are variety of wheels that you can use for your log splitter. Generally, castor wheels are used to make sure that your splitter is working with smooth operation. These wheels are easily attached to the splitter with the use of screw. 

  6. Test Your Splitter

    Once you are done with making your log splitter, it is time for you to test it. The best part about making your own log splitter out of a hydraulic jack is that you can always adjust the setting if you don’t like it particularly. To determine the speed and capacity of your machine, use the log splitter for the first time and test it. As you are testing out your log splitter, make a note of the following things:

    The speed of your log splitter. 
    The cutting edge and power of the splitter. 
    The sliding work if it is working or not. 
    Effective wedge to split the woods into halves. 

Conclusion

Hope this step by step guide as to how to make a log splitter out of a jack is really helpful for you. The best thing about making a log splitter at home is that you can pick point the flaws with your splitter and rebuilt on your own. Especially if you have a hydraulic jack lying around, it won’t be an issue at all. 

If you want to buy best log splitters then you can read our best buying guides and reviews on kinetic log splitter, manual log splitter & electric log splitter.

Read MoreTop 11 Log Splitters For Home Use

Leave a Comment

error

Enjoy this blog? Please spread the word :)